| |
| All Categories |
 |
| Systems |
|
 |
|
|
|
|
|
|
|
|
| Hardware |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
NEW
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Software |
|
|
|
|
|
|
| Part #: |
103002716-6591
|
| Warranty: |
1 Year
|
| Condition: |
New
|
| Packaging: |
Factory Box
|
| Ship Weight: |
92 lbs
|
| Manufacturer: |
Eaton
|
| MFG Part #: |
103002716-6591
|
| Model #: |
PW9125 2500U
|
| Supported By: |
Geeks
|
| Qualifies for $1.99 shipping when you spend over $49.99 |
| Use code: SAVEMONEY during checkout!
|
|
|
|
|
|
|
|
|
|
Protect your equipment!
This Eaton Powerware 9125 uninterruptible power supply protects your sensitive electronic equipment from the most common problems, including power failures, power sags, power surges, brownouts, line noise, high voltage spikes, frequency variations, switching transients, and harmonic distortion.
The Powerware 9125 features an online UPS design with pure sine wave output, filtering incoming AC power and providing consistent power without draining the battery. The 2U rack height allows for convenient mounting where you need it most, or attach the stands for vertical positioning.
Expand this UPS to meet your needs with optional extended battery modules (EBMs) and X-Slot for additional communication options. This UPS is designed for 120V applications and is rated for nominal power level inputs of 2500VA and 1750 watts.
Get yours today, order now!
|
| WARNING: |
The solder used in this product contains lead, a chemical known to the State of California to cause birth defects and other reproductive harm. Please wash hands after handling internal components and circuit boards and avoid inhalation of fumes if heating the solder. |
|
|
Features/Specifications:
|
- Eaton Powerware 9125 2500U 2500VA/1750W 120V 5-Outlet 2U Rackmount UPS System
- General Features:
- Black housing
- 2U rack height form factor
- Five (5) outlets
- Power levels: 2500 VA, 1750W
- Nominal voltage: 120V default, 110, 120, 127V selectable
- Input voltage range: 80-144V
- True online, double-conversion topology
- Pure sine wave output
- IEEE C62.41 Category B surge suppression
- Nominal frequency: 45-65 Hz, 50/60Hz auto-sensing
- Noise filtering: MOVs and line filter for normal and common mode noise
- Regulation (Normal Mode): Nominal output voltage ±3%
- Regulation (Battery Mode): Nominal output voltage ±3%
- RS-232 communication port
- Network Transient Protector
- LED status/load indicators
- Remote Emergency Power-Off (REPO) port
- Supports tower (vertical) or rackmount (horizontal) positions
- Expansion available through Optional X-slot and up to four (4) EBMs (not included)
- Advanced power management with included software
- Connections:
- Input: 6-foot, 5-30P attached power cord
- Output outlets: Two (2) 5-15R and two (2) 5-20R
- Output cord: One (1) 5-30R
- Battery:
- Six (6) 12V, 9 Ah internal batteries
- Hot-swappable
- Sealed, maintenance-free, valve-regulated, lead-acid
- Charging: approximately 3 hours to 90% usable capacity
- Monitoring: Advanced monitoring for earlier failure detection and warning
- Run time (full load): 7 minutes
- Run time (half load): 16 minutes
- Dimensions:
- 3.5 x 17 x 25-inches (H x W x D, approximate)
- 81.5 lbs
- Regulatory Approvals:
- FCC
- cULus
- CSA
- NOM
|
|
Package Includes:
|
- Eaton Powerware 9125 2500U 2500VA/1750W 120V 5-Outlet 2U Rackmount UPS System
- RS-232 cable
- Four (4) interlocking vertical stand feet
- Rackmount hardware (handles and brackets only, rails not included)
- User's guide
- Software suite on CD-ROM
|
|
Additional Information:
|
- Notes:
- Model: PW9125-2500U
- P/N: 103002716-6591
- UPC: 7 90341 04824 2
- Rackmount rails are not included
- Product Requirements:
- Available 120V input power source
- Available RS-232 port
- CD-ROM drive (for software CD)
|
|
|
|
|
