- Opticon OPI-2002 1.3MP 2D Handheld USB Imaging Scanner
- General Features:
- Lightweight, hand-held scanner
- Light source: 10 red LEDs 630 nm
- Scan method: CMOS area sensor, SXGA (1.3 million pixels), gray scale
- Scan rate: up to 30 fps
- Reading pitch angle: -60 to 0°, 0 to +60°
- Reading skew angle: -65 to 0°, 0 to +65°
- Reading tilt angle: 360 degrees
- Focal plane: 110 mm / 4.33 in from window
- Curvature: R>15 mm (EAN8), R>20 mm (EAN13)
- Reading width: depending on reading distance and barcode label resolution
- Minimum resolution at PCS 0.9: 0.127 mm / 5 mil
- Minimum PCS value: 0.45
- USB interface (6.5-foot cable length)
- Plug and Scan
- Voltage Requirement: 6 V ± 5%
- Current Consumption: 340 mA (typical use)
- Depth of field:
- *40 - 195 mm / 1.57 - 7.68 in (res. 0.339 mm / 13 mil)*, *85 - 125 mm / 3.35 - 4.92 in (res. 0.127 mm / 5 mil)*, 35 - 230 mm / 1.38 - 9.06 in (res. 0.5 mm / 20 mil), 55 - 160 mm / 2.17 - 6.30 in (res. 0.25 mm / 10 mil), 85 - 125 mm / 3.35 - 4.92 in (res. 0.127 mm / 5 mil), at *PDF417* and Code 39
- Field of view:
- Horizontal: 47º
- Vertical: 37.5º
- Identification:
- Supported barcode symbologies (1D): JAN/UPC/EAN (WPC) incl. add on, Codabar/NW-7, Code 39, Code 93, Code 128, IATA, Industrial 2of5, Interleaved 2of5, MSI/Plessey, RSS, Composite codes
- Supported 2D code symbologies: Aztec Code, Aztec Runes, Data Matrix, (ECC200/EC0-140), Maxi Code (mode 2~5), MicroPDF417, Micro QR Code, PDF417, QR code
- Functionality:
- Trigger mode: manual, multiple read, auto-trigger, stand detection
- Upgradeability: via cable
- Image format: Windows Bitmap, JPEG, TIF
- Gradulation: 256, 16, 2
- Image output mode: 4 resolutions (full, 1/2, 1/3, 1/4), 2 ranges (horizontal, vertical)
- Dimensions:
- 5.87 x 2 x 4.5-inches (H x W x D, approximate)
- Regulatory Approvals:
- FCC
- CE
- VCCI
|
