| |
| All Categories |
 |
| Systems |
|
 |
|
|
|
|
|
|
|
|
| Hardware |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
NEW
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Software |
|
|
|
|
|
|
| Part #: |
05147641-6591
|
| Warranty: |
1 Year
|
| Condition: |
New
|
| Packaging: |
Factory Box
|
| Ship Weight: |
100 lbs
|
| Manufacturer: |
Eaton
|
| MFG Part #: |
05147641-6591
|
| Model #: |
PW5125-3000E
|
| Supported By: |
Geeks
|
| Qualifies for $1.99 shipping when you spend over $49.99 |
| Use code: SAVEMONEY during checkout!
|
|
|
|
|
|
|
|
|
|
Keep your sensitive equipment safe and operational!
This Eaton Powerware 5125 Uninterruptible Power Supply (UPS) system provides powerful support and protection for your sensitive electronic equipment, protecting against five of the nine most common harmful power problems. The Powerware 5125 filters incoming power, provides overload protection, and battery backup while fitting in a convenient design that can be installed in servers racks or stored upright.
Expand this UPS to meet your needs with optional extended battery modules (EBMs) and X-Slot for additional communication options. This UPS is designed for 230V applications and is rated for nominal power level inputs of 3000VA and 2700 watts.
Protect your mission critical equipment, order yours today!
|
| WARNING: |
The solder used in this product contains lead, a chemical known to the State of California to cause birth defects and other reproductive harm. Please wash hands after handling internal components and circuit boards and avoid inhalation of fumes if heating the solder. |
|
|
Features/Specifications:
|
- Eaton Powerware 5125 3000E 3000VA/2700W 230V 10-Outlet 2U Rackmount UPS System
- General Features:
- Black housing
- 2U rack height form factor
- Ten (10) total outlets
- Power levels: 3000VA, 2700W
- Nominal voltage: 230V
- Input voltage range: 166-276 VAC (+20%/-30% of nominal)
- Operating Frequency: 50/60 Hz auto-sensing
- Nominal output voltage: 220/230/240 VAC
- Pure sine wave output
- Surge suppression: ANSI C62.41 Category B, IEC 61000-4-5
- Noise filtering: MOVs and line filter for normal and common mode noise
- Output voltage regulation: -10%/+6% of selected nominal voltage
- Overload capacity: 110% 3 min; 150% 10 cycles
- Efficiency: 95%
- Informative LED display
- Remote Emergency Power-Off (REPO) port
- Audible alarm
- RS232 communication port
- Tower (vertical) or rackmount (horizontal) positions
- Mounting hardware included for tower mounting
- Expansion available through Optional X-slot and up to four (4) EBMs (not included)
- Advanced power management with included software
- Connections:
- Input: 16A, IEC320-C20 input connector
- Output: One (1) IEC320-C19, Nine (9) IEC320-C13 outlets
- Battery:
- Ten (10) 12V 5Ah internal batteries
- Hot-swappable
- Sealed, maintenance-free, valve-regulated, lead-acid
- Charging: approximately 3 hours to 90% usable capacity
- Monitoring: Advanced monitoring for earlier failure detection and warning
- Run time (full load): 5 minutes
- Run time (half-load): 15 minutes
- Dimensions:
- 3.5 x 19 x 24.5-inches (H x W x D, approximate)
- 82 lbs (37 kg)
- Regulatory Approvals:
- FCC
- cULus
- CSA
- TUV/GS
|
|
Package Includes:
|
- Eaton Powerware 5125 3000E 3000VA/2700W 230V 10-Outlet 2U Rackmount UPS System
- RS-232 cable
- Four (4) interlocking veritcal stand feet
- Rackmount hardware (handles and brackets only, rails not included)
- User's Guide
- Software suite on CD-ROM
- IEC320-C19 rewireable cord
- Two (2) IEC320-C13 extension cables
|
|
Additional Information:
|
- Notes:
- Model: PW5125-3000E RM
- P/N: 05147641-6591
- UPC: 7 90341 04655 2
- Rackmount rails are not included
- Product Requirements:
- Available 230V input power source
- Available RS-232 port
- CD-ROM drive (for software CD)
|
|
|
|
|
